June 17, 2026
In many industrial, warehouse, and construction environments, overhead access is a constant challenge — and conventional aerial work platforms are simply too large, too heavy, or too rigid to operate where the work actually happens. Narrow aisles, low-clearance doorways, and confined interior spaces demand a different kind of solution.
The Single-Mast Inclinable Aluminum Alloy Aerial Work Platform is engineered specifically for these demanding environments. With a maximum safe working height of up to 12 meters, a compact footprint of just 750mm wide, and an innovative inclinable mast that tilts for transport and low-clearance entry, this platform delivers overhead access where no conventional lift can go — safely, efficiently, and with minimal operator effort.
The numbers that define what this platform can do — and why they matter for your operation.
These figures are the result of deliberate engineering choices — from the aluminum alloy structure that keeps machine weight low without sacrificing rigidity, to the outrigger system that extends to 2,240mm wide for a stable footprint at full working height.
The defining innovation of this platform is its inclinable mast structure — and it solves two of the biggest practical challenges in aerial work platform operation simultaneously.
First, it transforms site-to-site relocation. Rather than requiring a dedicated low-loader or complex disassembly procedure, the mast simply tilts down to a transport position (overall tilted height: 2,650mm), allowing the platform to be loaded onto standard transport vehicles quickly and without specialist equipment. This saves hours across a typical working week for teams that move frequently between sites.
Second, and perhaps more importantly for day-to-day use, the inclinable mast allows the platform to pass through low-clearance doorways and restricted-entry areas that would stop a conventional vertical-mast platform entirely. With a storage height of just 2,350mm and the ability to tilt to clear restricted openings, this platform can access interior spaces — mezzanine levels, plant rooms, production bays — that most aerial platforms simply cannot enter.
Every element of this platform has been designed with practical daily use in mind — from the ground-level controls to the ergonomic boarding step.
Tilts for loading onto transport vehicles and for entry through low-clearance areas — enabling fast relocation and access to confined spaces where conventional platforms cannot operate.
At 750mm wide and 500kg total weight, the aluminum alloy frame enables smooth manual maneuvering in narrow aisles and confined work environments without powered drive assistance.
Integrated outriggers extend to 2,260mm × 2,240mm, providing a broad, stable base throughout the full lifting range — critical for safe operation at maximum working height.
12V DC / 15A charger with plug-and-play convenience. The 12V/60Ah battery supports a full working cycle, and recharging is fast and straightforward — minimizing downtime between shifts.
Both platform-level and ground-level controls are integrated, enabling efficient coordination between operator and ground crew — particularly valuable for complex installation and maintenance tasks.
An integrated ground-level control panel allows intuitive equipment operation from floor level — enabling supervisors to assist, position, and monitor without requiring a second person on the platform.
Thoughtfully designed boarding and alighting access reduces operator effort and improves safety during entry and exit — particularly important during high-frequency use across long working shifts.
The 12V DC / 1.6kW lift motor delivers smooth, controlled raising and lowering across the full 12-meter range — with a raise/lower cycle of 26–40 seconds for efficient task-to-task transitions.
Complete dimensional, electrical, and performance data for the Single-Mast Inclinable Aluminum Alloy Aerial Work Platform.
| Parameter | Value |
|---|---|
| Dimensions | |
| Max Safe Working Height | Up to 12,000 mm (12 m) |
| Max Platform Height | 1,1000 mm |
| Overall Machine Length | 1,390 mm |
| Overall Machine Width | 750 mm |
| Overall Height (Tilted) | 2,650 mm |
| Overall Storage Height | 2,350 mm |
| Outrigger Extended Length | 2,260 mm |
| Outrigger Extended Width | 2,240 mm |
| Extension Bracket Extended Width | 2,150 mm |
| Platform Length | 680 mm |
| Platform Width | 680 mm |
| Ground Clearance (Folded/Raised) | 55 mm |
| Machine Weight (DC) | 500 kg |
| Swivel Caster Size | Φ127 × 50 mm |
| Fixed Caster Size | Φ203 × 50 mm |
| Electrical & Hydraulic | |
| Voltage | 12V DC |
| Lift Motor | 12V DC / 1.6 kW |
| Battery | 12V / 60Ah |
| Charger | 12V DC / 15A |
| Performance | |
| Safe Working Load | 136 kg |
| Max Occupants (indoor / outdoor) | 1 |
| Max Allowable Manual Force | 200 N |
| Raise / Lower Time | 26 – 40 seconds |
The combination of compact dimensions, inclinable mast, and 12-meter reach makes this platform the right choice wherever conventional aerial equipment struggles or cannot fit.
Navigate narrow racking aisles and access high storage zones for lighting, sprinkler, and structural maintenance without disrupting warehouse operations.
Safely reach high shelving for inventory counts, label replacement, and product placement in retail, wholesale, and distribution center environments.
Ideal for electrical conduit, HVAC ductwork, ceiling fixtures, and overhead pipework installation in commercial buildings, factories, and production facilities.
The inclinable mast provides access through low-clearance doorways and into restricted spaces where standard platforms with fixed vertical masts cannot enter.
Equipment servicing, structural inspection, and overhead asset maintenance in manufacturing plants where access is restricted by low clearances or tight layouts.
Decades of material handling expertise — SINOLIFT is a nationally recognized Chinese manufacturer serving customers across more than 50 countries, with a product range spanning aerial platforms, pallet trucks, drum handlers, scissor lifts, and more.
Purpose-built for confined environments — unlike general-purpose aerial platforms, this machine is designed from the ground up for the specific challenges of narrow, low-clearance, and restricted-entry workspaces.
Aluminum alloy construction — the lightweight yet rigid frame keeps machine weight at 500kg, enabling manual maneuvering and reducing floor loading compared to steel-frame alternatives.
Full safety compliance — integrated outrigger system, 136kg safe working load rating, and a maximum allowable manual force of 200N ensure the platform meets industrial safety standards across all operating conditions.
Factory-direct pricing and support — purchase directly from SINOLIFT for competitive pricing, comprehensive technical documentation, and access to a global spare parts and after-sales service network.
Ready to solve your confined-space access challenges? Contact SINOLIFT for full specifications, pricing, and a recommendation tailored to your application.
Contact SINOLIFTRelated search terms
